RV Conversions Community
Bus Discussion => Bus Topics ( click here for quick start! ) => Topic started by: Dave5Cs on November 14, 2026, 09:13:29 AM
My generator hose that feeds from the lower outlet on big tank passenger side to the driver side where the kuboda 3 cyclinder genny sits is plugged up. I hooked a short hose to the incoming pump and put it in a 5 gallon can of diesel and all is good that way. Pump pulls and genny runs fine.
Do I use air or Vaccuum to clear the hose and is there a check valve at the tank or will it just blow back into the tank and flow again? Or should I just change the hose. Ihave 25 feet (only need 12 feet) of 3/8"ID fuel line 5/8 OD that I bought a year ago?
Once & done I would replace the hose unless the curiousity for the underlying reason for the blockage overrules.
Ya Dan It is a real pain to get to. And if the hose is clogging what is the tank condition. So far no problems running engine.