RV Conversions Community
Bus Discussion => Bus Topics ( click here for quick start! ) => Topic started by: 4104bigred on June 01, 2007, 07:50:59 AM
I picked up a williams air treadle throttle and a williams governor actuator on ebay and need some help figuring out how to fabricate a bracket to hold the actuator on the engine.
any one that happens to have an air throttle installed and can post a photo of it would sure be a great help
thanks
chris
[email protected]
Chris:
This is a factory install on my v-drive 8v71, so I don't know how much help it'll be... but here goes:
Here are a couple photos of our installation on our MC-8 8V71. The throttle pedal part is reay to re-install the throttle pedal. Is your bus a manual or auto transmission? If auto like ours, we removed the mechanical modulator valve and repaced it with an air modulator. Jack