Muffler on E place

[oldmansax]

I know some were looking for a muffler. This one may work:

http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&item=110210646423&fromMakeTrack=true&ssPageName=VIP:watchlink:top:us

I have no interest in this, just though it may help somebody.

TOM

[TomC]

On 4 stoke engines, a 5 inch muffler will usually due.  But on a 2 stroke, the air flow is very sensitive.  As example- when I turbocharged my bus I at first kept the original muffler which was 13" round by 65" long-very big-so I thought it would flow enough.  I was wrong!  I bought a Donaldson 5" inlet and outlet on the same side that was 10 x 14 oval by only 21 inches long and weighed a fraction of the old muffler.  So even though the new muffler was about a third the size of the old muffler, it flowed much better since it was made for a turbocharged engine, plus it now puts out a nice tone.  If you want that muffler, find out the brand, part number and run the applications that muffler was made for.  Mufflers are just like tires-there are an exact application they are made for-not just big black round things that roll down the road (Michelin has 45 different models of tires in the 11R-22.5 size alone!).  Besides, a good muffler isn't all that expensive- about $150-250.  Good Luck, TomC